网络公共资源防护技术研究

提出了一种网络公共资源防护系统,用于有效阻止对网络公共资源的恶意破坏、提高网络资源的末端防护能力、保证信息服务的安全可靠。首先,根据网络公共资源自身的特点和防护需求,为了使整个防护系统能够灵活、高效地运转,设计了一种“监测-处理-恢复-监测”闭环反馈运转机制;然后,介绍了系统中的体系化联动机制和主动防御方法。实验结果表明：平均资源修复速率为本地31.95KB/毫秒,网络16.10KB/毫秒。系统部署后,访问测试网站的平均响应时间仅降低了1.93%,不会影响资源的可用性。     

柴达木盆地涩北气田疏松砂岩气藏水气体积比及水侵预警

柴达木盆地涩北气田属于弱边水驱动的背斜型浅层疏松砂岩气田,采用衰竭式开采。根据水气体积比,其气藏生产过程可分为4个阶段,即低含水稳产阶段、初期水侵阶段、边水突破阶段和强水侵阶段。依照水气体积比变化,可以准确监测水侵的发生,水侵突破阶段可以作为预判边水大规模水侵的时间窗口,以调整开采方案,延长稳产期;高含水的强水侵阶段,生产周期较长,是带水开采提高采收率的重要阶段。     

Bioelectrochemical sulfate reduction enhanced nitrogen removal from industrial wastewater containing ammonia and sulfate

Low organic carbon-to-nitrogen ratio and existing sulfate (SO₄²⁻) in industrial wastewater limited nitrogen removal. Coupling SO₄²⁻ reduction with sulfide autotrophic denitrification provides a novel strategy. Herein, bioelectrochemical sulfate reduction was coupled with heterotrophic sulfate reduction to drive sulfide autotrophic denitrification. In this coupled system, total nitrogen (TN) removal efficiency was increased from ~25% to ~85% by inputting −45 mA electricity. With the help of supplying electrons to denitrification through SO₄²⁻ reduction, coulomb efficiency was improved to 61.5%. Also, bioelectrochemical sulfate reduction could improve sulfur recovery and thus increase TN removal efficiency. Furthermore, through tuning turnover numbers of SO₄²⁻, high TN removal efficiency can be obtained at various concentrations of SO₄²⁻. Moreover, main functional bacteria in this system were identified. Finally, ~75% TN removal efficiency was achieved with real wastewater in this system. Overall, this work offered a new approach for efficient nitrogen removal from industrial wastewater containing SO₄²⁻.     

Electrically conductive and thermally stable SiC-TiC containing nanocomposites via flash pyrolysis

Flash pyrolysis, which combines conventional pyrolysis with flash sintering, was first conducted to produce polymer derived SiC-TiC nanocomposites. Pre-pyrolysis at 800℃ allows the conversion from titanium isopropoxide (TTIP) modified polysiloxane to an amorphous SiTiOC ceramic. The subsequent application of an electric field gives rise to the formation of turbostratic carbon and creates Joule heating to obtain a sample internal temperature of ~1400℃. The precipitation of β-SiC, TiC, as well as titanium oxides is realized upon carbothermal reduction of extensively phase separated SiO₂ and TiO₂ with carbon. Increasing TTIP content embodies the nanocomposites with prominent electrical percolation behaviors. The electrical transport of the synthesized ceramics follows an amorphous semiconductor mechanism. High thermal stability in air is guaranteed, thanks to the in-situ formed TiC nanocrystals and preferentially reduced amorphous carbon. Flash pyrolyzed nanocomposite with a Ti:Si molar ratio of 0.20 exhibits the highest electrical conductivity (0.696 S/cm) and minimum mass change (~2%) at 1000℃, serving as a competitive candidate for electro-discharge machining (EDM) applications or self-standing conducting devices that must withstand high temperature conditions.     

Electrochemical investigation of La0.4Sr0.6TiO3 synthesized in air for SOFC application

Journal of Applied Electrochemistry - La-doped titanate materials have been widely investigated as alternative Ni-free anodes for solid oxide fuel cells (SOFCs). In this study, La0.4Sr0.6TiO3 (LST)...     

移动硬盘盒精密热流道注塑模具设计

热流道注塑模具在模具行业中的应用越来越广泛,采用热流道系统不仅可以保证塑件质量、提高材料的利用率,还能显著提高塑件的生产效率。通过对移动硬盘塑料件的结构及成型工艺特点进行分析,设计了移动硬盘塑料件热流道注射模具,重点对热流道模具热平衡计算和热流道浇注系统进行了分析计算,模具采用单点热流道、一模两件潜伏式浇口、外滑块抽芯机构及斜推杆抽芯成型倒扣设计。实践证明,该移动硬盘塑料件模具设计结构合理,在提高塑料件成型质量的同时,提高了材料的利用率及生产效率,为同类结构特点的热流道注塑模设计提供了参考。     

一例1000kV单相自耦变压器局部放电故障的诊断与分析

分析了一台1000kV单相自耦变压器局放试验图谱与数据,通过吊罩解体检查发现了故障部位,并对后续此类产品试验过程中的注意事项提出建议.     

电池模组垂直方向温度场仿真与实验分析

热管理系统在维持电池组内部热量均衡、使电池安全可靠、延长电池使用寿命方面发挥重要作用.利用Floefd软件对电池标准模组进行高度方向温度场热仿真分析,并开展验证实验.在电池组放电过程中测量模组底部、上表面、冷却板导热垫、侧板等高度方向各点温度,将仿真与实验数据进行对比分析.结果表明,典型工况时,电池模组上表面温度达到45℃,模组上表面与底面温度差12℃,与仿真结果10.77℃相近;模组和液冷板间的导热垫上下表面,温度差2℃,与仿真结果一致.     

超过冷条件下Fe83B17共晶合金的凝固行为及显微组织演化

采用深过冷技术研究了块体Fe83B17共晶合金在超过冷度条件下的凝固行为．该合金的组织演化规律为：当过冷度达到理论临界超过冷度（300K）时，组织为α-Fe相和Fe2B相组成的共晶组织；当过冷度大于临界值达到386K时，组织粗化，为完全的非规则共晶，稳定相Fe2B消失，亚稳相Fe3B出现并且在室温下也不会分解；获得了460K的超过冷度以及亚稳相组织．并讨论了这些结果产生的原因．     

填料粒子成型对泡沫铝合金孔结构的影响

在实验的基础上 ,绘制出填料粒子成型时的体积与泡沫铝合金的孔隙率相对应的变化曲线 ,并应用力学的基本原理对泡沫铝合金孔结构的成形机理进行了研究。确定填料粒子成型时的体积变化应在 0 %～ 12 %之间 (此时泡沫铝合金的孔隙率应在 41.6 %～ 47.6 %之间 ) ,才能稳定填料粒子尺寸 ,从而更好地控制泡沫铝合金的孔径尺寸 ,提高成型质量 ,稳定泡沫铝合金的使用性能。